Bluetooth device not seen

Setting up Bluetooth:

Enable Bluetooth in the BIOS

1.Start the computer. While the Fujitsu logo is displayed, choose to enter the BIOS
On the keyboard, press F2
 If the computer does not have a keyboard, follow the instructions on the screen for entering BIOS Setup
2. The BIOS Setup Utility opens with the Main tab highlighted. Use the arrow keys to select the Advanced tab (the stylus may be used on some Tablet PCs)
3. Highlight Internal Device Configurations and press Enter
4. The Internal Device Configurations screen displays. If necessary, change the Bluetooth(R): setting from Disabled to Enabled
5. Choose Exit Submenu and then select the Exit tab, select Exit Saving Changes and then Yes to confirm
6. The computer restarts
2. Install the Bluetooth software and drivers
1. A CD labeled Bluetooth Software CD is included with your Fujitsu computer
2. Load the CD in the CD Drive, it will automatically start the installation process, follow the onscreen instructions carefully.
 The CD may ask to restart the computer, resume installation and restart again
 In some cases, before the second restart an "End Task" dialog box will display. It is safe to press the [End Task] button, this will not affect the installation.
Other information about Bluetooth and the Bluetooth devices:
• If the Bluetooth device is enabled in the BIOS, but the software is not installed, a device name USB BT may show as a problem device in Windows Device Manager. Install the software from the Bluetooth Software CD
• An Unknown Device may be listed in Device Manager if the Bluetooth software is not installed correctly. The device driver is installed by running the Bluetooth Software CD.
o Once installed, the device is listed under System devices as Fujitsu FUJ02E1 Device Driver (the FUJ02E1 device controls power to the radio devices on the computer at the hardware level)
• The Bluetooth device will install many COM Ports, these are virtual COM Ports, the numbers are assigned by Windows which assigns port numbers as available during installation